John E. Johnson, Jr.

OPPO BDP-105 Universal Blu-ray Player Review

OPPO continues its tradition of being leader of the pack with the introduction of the BDP-105 Universal Player. It has every type of input that one could want, making it truly a player that can handle all types of media and sources. The video quality is superb (video results coming in Chris Heinonen's review of the 103 which has the same video circuit as the 105), and the audio quality (tested in this review) is what we have come to expect from OPPO: audiophile-grade.

KEN KREISEL DXD-12012 Dual 12″ Push-Pull Subwoofer

Ken Kreisel of M&K sold his company years ago, and it continues to thrive. Now he is back, selling subwoofers and speakers mainly to the pro market, under the company name KEN KREISEL. The DXD-12012 is the foundation for a subwoofer system that, when combined as two subs, one on top of the other (called the DUO) or more (sixteen subs, called the QUATTRO-QUATTRO), produces the kind of SPL that movie and music studios need when they are in post-production. However, what differentiates the DXD-12012 from other subs is its accuracy.

Pass Labs XP-10 Stereo Preamplifier

 In the past, we reviewed the Pass Labs XP-20 and XP-30 stereo preamplifiers. Now, we come full circle with a review of the remaining member of their preamplifier trio, the XP-10, which is the least expensive model. It is fully balanced, and has a slightly different sound character compared to the other two, which also sound different from one another. All three are great products, so you can choose based on price and/or sound characteristics.

 

 

Classe SSP-800 Surround Sound Processor

Classé is considered one of the finest audio product manufacturers in North America. They market preamplifiers, power amplifiers, and surround sound processors (SSPs). The SSP-800 is their current processor. It's been around for awhile, and they have no plans to replace it with a new model in the near future, but there have been some firmware updates along the way. So, I decided that Secrets should have a look and listen to what I was sure would be a fine product. Was I right?

NAD M51 Direct Digital DAC

 

Most audio component manufacturers have a DAC in their product lineup, and NAD is no exception. However, the NAD M51 is unusual in that it takes the incoming digital PCM bitstream and converts it directly to a PWM bitstream, which is then fed directly to the output. The idea has been around for about a decade, but the technology for implementing it was not fast enough in those early days. Now, with modern technology and techniques, NAD has produced what they call a "Direct Digital DAC", where the digital signal does not go through digital to analog conversion in the normal sense, but converted to PWM at 844 kHz sampling, with 35 bit word length. As you will see with the bench tests, the results are quite amazing, and the price is very affordable.

HiFiMan HE-500 Over-the-Ear Planar Magnetic Headphones and EF5 Headphone Amplifier

HiFiMan is a relative newcomer (2006) to the audio product scene. Their specialty is headphones (including over-the-ear and earbuds) and headphone amplifiers. We have reviewed several of their headphones, with positive and enthusiastic findings. The HE-500, reviewed here, are over-the-ear headphones, meaning that they completely enclose the ears. This model also uses planar magnetic drivers, which unlike cone drivers, are flat, very thin plastic membranes, on which is attached a thin conductor. The membrane is near permanent magnets, and when the signal flows through the conductor, the opposing electromagnetic field on the conductive membrane is pushed away from or attracted to the permanent magnets, producing the sound.

D-Wings Cable Management

All of us have had to deal with cable management in our audio and home theater systems. What we usually end up with is a tangle of wires that look like a mess. There are a number of cable management systems out there, but they most often involve tubes through which you pass the cables. D-Wings, marketed by UT-Wire, represent a completely different, and much easier to use, cable management product.

Integrating High-End Two-Channel Audio into Home Theater without Compromise

For those of us who enjoy two-channel (stereo) audio using a high-end system, but also like our home theater with surround sound, how to integrate the two setups without compromising the stereo high-end system has been a conundrum. In this article, I will show you how to have both systems interconnected, but not compromise the sound when you want to listen to your stereo CDs, or SACD in stereo.

NAD M3 Integrated Stereo Amplifier

If you look at the specs of most stereo integrated amplifiers, the rated RMS power output is between 60 watts and 120 watts per channel. This is lower than the power output of outboard power amplifiers, which typically are about 125 watts to 300 watts per channel. Monoblocks go all the way up to 2,000 watts output. One of the main reasons for this is that in an integrated power amplifier, the preamplifier circuit is situated very close to the power amplifier. Keeping the high voltage, high current power amplifier signal from inducting noise into the preamplifier circuit is difficult. NAD apparently has solved this problem with the introduction of their M3 Integrated Amplifier, which has a rated output of 180 watts per channel, at 0.004% THD+N, and clipping (1% THD+N) at 220 watts.

Velodyne vPulse In-Ear Headphones (Earbuds)

With the prevalence of portable music players to the point that you must be from Mars if you don't own one, there is a huge aftermarket for high quality earphones (headphones is the category, with over-the-ear headphones, on-ear-headphones, in-ear headphones, in-ear-earphones, and in-ear earbuds being the specific type of headphone one is referring to). Velodyne, renown manufacturer of subwoofers, not to be left out of this trend, has released a set of in-ear headphones called the vPulse....and best of all, they sound like Velodyne all the way . . . a.k.a. very, very good.

Anthem P2 Two-Channel Power Amplifier

Anthem's statement multi-channel power amplifiers are called the P series. They come in two versions, a five-channel (P5) and a two-channel (P2). My home theater test lab has a 200 watt x 5 amplifier which works great for the majority of applications, but it is driving electrostatic speakers (ESLs), and for a handful of Blu-ray movies, the amplifier will go into protect mode when at high volume, because ESLs typically have a very low impedance (1 ohm) in the high frequency range.

Rein Audio X-DAC with USB Input

USB DACs are hot items now because you can play music from your computer through them and into a set of headphones or to your main hi-fi rig. Some of these DACs only have a USB input, (no S/PDIF inputs) because their main purpose is for use with a computer. Of course, all computers come with audio ciruitry on the motherboard, and if you have a sound card installed in one of the PC card slots, it may very well have an S/PDIF output. However, their quality is often questionable due to the typically low cost of the sound card. Rein Audio, a German manufacturer, makes the X-DAC, which is a 24/192 DAC with both coaxial and Toslink optical S/PDIF inputs, but also, it has a USB input (24/96) to be used with your computer, giving you better sound quality than you would get from your computer's audio circuit.

Classe CP-800 Stereo Preamplifier

Classé's new CP-800 is a high performance ("High-End") stereo preamplifier, but it is not just yet another preamp with minor changes from previous models. This one has the option of switching in some DSP that adds several EQ bands and dedicated stereo subwoofer outputs. If you don't use the DSP, it's not in the signal path, and you can still call yourself a "purist" audiophile. Have no doubts; this is a very unique product, and the performance is stellar.