Dynaudio launches new Contour i family

Skanderborg, Denmark – April 23, 2020

Dynaudio is excited to take the wraps off its new Contour i series – an extensive update to the multi-award-winning 2016 Contour range.

The family has been totally overhauled under the hood with advanced acoustic technology trickled down from the flagship Confidence range. And the results are plain to hear.

“We didn’t do it because we had to, we did it because we wanted to,” says Otto Jørgensen, product manager. “Basically, this is what happens when you leave our engineers alone with a speaker – they can’t help but improve it. We gained so much knowledge during the Confidence project that we simply had to share it with Contour. And we’re absolutely thrilled with the results.”

Taking it from the top, the brand-new Esotar 2i tweeter on all models gains the ingenious Hexis resonance-defeating inner dome, plus a new, larger rear chamber. Together they reduce distortion and provide a flatter frequency response.

The Contour 20i, 30i and 25Ci woofers all gain an updated Nomex spider. It’s the same structural design as the 2016 Contour (with varying-width corrugations for finer excursion control), but the new material simply sounds better – the result of many hours of listening in Dynaudio Labs.

Contour 60i has new woofers with a larger magnet system, an updated voice-coil design and a glass-fibre voice-coil former, as first used in the new Confidence range and the Dynaudio Sub 6 subwoofer. The result is tighter bass, even at higher volume.

And Contour 60i’s midrange driver? No change to the driver itself, but it does sit in a new moulded, resonance-damping enclosure derived from Dynaudio’s flagship professional reference monitor range, Core.

Contour 20i, 30i and 25Ci feature updated crossovers. And, because of the driver tweaks providing an inherently flat frequency response, it means Dynaudio has been able to remove the impedance correction circuitry for an even simpler board.

Contour 60i utilizes a completely new crossover due to the new woofers and new Esotar 2i tweeter. Additionally, the effect of the moulded midrange cup and the Nomex woofer spiders enabled the company’s engineers to shift the crossover frequency up. It now works better at slightly higher frequencies (up to around 300Hz). The frequency curve in this region is also flatter, meaning better midrange performance from a simpler crossover.

Even the internal damping is brand-new – using lessons learned from the Evoke and Confidence developments.

And, of course, the complete range was extensively optimised in Dynaudio’s world-leading Jupiter measuring facility before being subjected to countless hours of listening by the experts in Dynaudio Labs.

Finally, the finishes have been improved. The range will be available in three finish variants, all with enhanced surface quality:

Walnut: open-wood veneer with a more natural look and feel
Grey Oak High Gloss: natural oak veneer stained in a striking grey colour, covered in an improved high-gloss lacquer
Black High Gloss: black-painted cabinets covered in an improved high-gloss lacquer

The new Dynaudio Contour i will be available in the US by August, 2020.

Contour 20i: $5,250 per pair
Contour 30i: $8,250 per pair
Contour 60i: $10,750 per pair
Contour 25Ci: $3,750 each

About Dynaudio

Dynaudio was founded in 1977 in Skanderborg, Denmark. Today, it’s recognised as a leading manufacturer of high-quality audio systems, and one of the world’s most distinguished high-end audio companies. Dynaudio designs, engineers and manufactures dedicated systems for professional studios, as well as car audio and home hi-fi and consumer loudspeaker products, from its state-of-the-art facility in Denmark. The company is particularly recognised for its advanced driver technology designed, engineered, and continuously developed in-house, not to mention its furniture-grade, handcrafted cabinetry.