Meet the Anthem Statement M1 Amplifier: 1 Kilowatt – 1 Rack Unit

The single rack unit Class D mono power amplifier outperforms its class with sophisticated monitoring circuits that maintain proper frequency response, even when powering the heaviest speaker loads using a 120V line.

Indianapolis, IN – CEDIA EXPO 2011 – September 8-10, 2011 – Booth# 3224 – With a legacy of value-driven power and performance audio products, Anthem brings a new level of sound to high-power amplifiers with the Anthem Statement M1. Engineered with advanced load monitoring and power factor correction technology to satisfy demands up to 2400 W, even when connected to a 120V/15A line, the M1 annihilates perceptions that Class D amplifiers aren’t suitable for hi-end sound systems. Frequency response is load-independent – the difference in response between a 2-ohm load and an open circuit is only an astounding 0.1 dB! Between 4 ohms and 8 ohms there is no change in frequency response at all!

The M1 is also a true “double-down” amplifier with 1000W into 8 ohms and 2000W into 4 ohms, with total harmonic distortion remaining under 0.1% from 20 Hz to 20 kHz.  Class D amplifiers provide tremendous value over traditional amps because of their efficient output from a smaller form factor, and the M1 is no different. Occupying only a single rack unit, Anthem also outfitted the new Statement amplifier with a heat pipe cooling system that allows multiple M1s, with feet removed, to be rack-mounted directly on one another. Fanless and easy-to-integrate, the M1’s design makes it a serious contender whether installed in the listening room or in an equipment closet.

Since not every household has the ideal 240V mains to handle peak power demands, Anthem’s Statement M1 uses a proprietary load monitoring system. Included in the system is a digitally modeled time constant of the circuit interruptor, something that does not trip the instant its maximum current is reached. Similar to slow-blow (time-lag) fuses and service panel breakers, it is meant to allow momentary current surges which do not last long enough to result in excessive heat.

In addition, the M1 contains active power factor correction to maximize available power. Without it, significantly less power is available. The result is that while the M1 can put out 2 kW continuously when fed by 240V mains, it can still put out 2 kW for the duration of typical musical peaks when fed by a dedicated 120V 15A line, without causing circuit interruption.

“Anthem has a rich history with traditional hi-end amplifier design, and because we do everything in-house, we are able to incorporate that knowledge into the Class D Statement M1,” said Mark Aling, director of marketing for Anthem. “It’s easy to be fooled because of how slim the M1 is, but we can’t wait for the reaction people get from this powerhouse, both in terms of sound quality and high output.”

The Anthem Statement M1 has an estimated US MSRP of $3500. More information on Anthem can be found at www.anthemAV.com.

 

About Anthem

Anthem, part of Paradigm Electronics Inc., is a leading manufacturer of award-winning high-end electronics for music, home theater and distributed sound systems sold internationally under the brand names Anthem® and Anthem® Statement. Products are used at all levels of music reproduction and allow you to virtually “be there” every time you listen to a favorite piece of recorded music or experience the excitement of surround-sound home theater. Headquarters are in Mississauga, Ontario, Canada.

Anthem and Anthem Statement are trademarks of Anthem/Sonic Frontiers International, copyright Paradigm Electronics Inc. All rights reserved.

Press Contact: Caster Communications, Inc. at 401.792.7080
Nick Brown: [email protected]
Lauren Simmen [email protected]
For digital images log on to www.castercomm.com